- Home
- Equipment
Refine by
Gouda Geo Environmental Equipment & Supplies
89 equipment items found
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Simple to use device for the injection of viscous fluids (molasses) into the ground. Outer diameter of the sleeve: 55 mm. Apex angle of the conical tip: 30°. Number of injection holes: 8. Diameter of injection holes: 6 ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Standpipe piezometers are used to monitor piezometric water levels. Observation wells are used to monitor ground water ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The hand pulled dynamic penetrometer rigs of the LMSR series are either driven by a gasoline engine, an electric motor or by a hydraulic ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
In the quotations Gouda-Geo issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a truck-based, crawler-based, trailer-based or stand-alone unit) and on the other hand the CPT system (this could either be mechanical or electrical CPT(U) system with automated or manual recording). This page describes the “economic” base kit one would ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The dielectrical module is an easy to use, versatile and straightforward geotechnical measuring instrument, that can be mounted on top of and can be used in combination with a standard 15 cm² electric CPT(U) cone. It is able to measure accurately the electrical conductivity (or resistance, as resistance is the inverse of conductivity) of the soil. Since the conductivity tests are carried out ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this job. The 200 kN stand-alone CPT ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The CPT push-and-pull clamp is purposely designed for automatic pushing and pulling of CPT sounding tubes (Ø = 36 mm) and casing tubes (Ø = 55 mm) during electrical CPT testing ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The closed soil sampling tubes are made of high-quality steel and designed such, that they can accommodate a transparent PVC liner for holding the soil sample. The inner diameter of the liner is 48 mm, the outer diameter is 50 mm. The cutting shoe is detachable by means of a screw connection enabling the appliance of a core ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT testing. The platform is ballasted up to a weight of approx. 5,000 kg and fully autonomous due to its diesel-hydraulic power pack. It comes with ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The hand-pushed CPT penetrometers by Gouda Geo-Equipment are portable and handy tools for simple, quick and accurate assessment of soil conditions for various purposes. We deliver our penetrometer to many international companies for their soil investigation projects. Our penetrometers are easy and straightforward to operate; you can push them into the ground using the weight of your own ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The industrial panel computer for CPT trucks and CPT crawlers is a rugged, compact panel-mount industrial fanless PC with a 15″ TFT LCD screen featuring touch screen. It is powered by an Intel Celeron M processor and offers optimal heat dissipation and low-power consumption without sacrifice of speed performance. This PC also features 2 PCI expansion slots, 3 COM ports, 2 USB 2.0 ports, ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
A settlement beacon is a measuring pole with large footplate used to determine changes in the level of deeper soil layers when subject to forces caused by filling. It is also possible to determine more accurately the amount of filling material ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Purposely designed rig for working inside buildings. The short-stroke 200 kN pusher is provided with a built-in push-and-pull clamp and powered by a 400 Vac electric-hydraulic power-pack. Standard 1000 mm long CPT tubes are ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
This manual DPL testing set is a great example of our dynamic penetration testing equipment and is suitable for doing light (10 kg) dynamic penetration tests according to ISO 22476-2 (replaces DIN 4094-3). Use this reliable tool from Gouda Geo-Equipment to conduct cost-effective soil investigations anytime and ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Measure excess pore pressure that is generated during soil penetration with our digital CPTU piezocone testing system. In the quotations, Gouda Geo-Equipment issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a truck-based, crawler-based, trailer-based or stand-alone unit) and on the other hand the CPT system (this could either be mechanical ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international market. The seismic CPT system is used worldwide and features the following advantages: Seismic tests are carried out during a traditional ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The sounding rods are used during Dynamic Penetration Testing (DPT) and Standard Penetration Testing (SPT) to hammer the sounding tips into the ground by means of a dynamic penetrometer rig. Gouda-Geo DPT and SPT sounding rods meet the highest quality standards. The rod material is manufactured by one of Europe’s leading steel manufacturers according to our own “Gouda-Geo” ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
When you take a stand-alone CPT penetrometer pusher or a LMSR dynamic penetrometer into the field, a load of sounding tubes, tools, instruments and accessories is needed as well. For this reason Gouda-Geo proposes a handy trolley for the transport of all these materials in the ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
When you take a stand-alone CPT penetrometer pusher or a LMSR dynamic penetrometer into the field, a load of sounding tubes, tools, instruments and accessories is needed as well. For this reason Gouda-Geo proposes a handy trolley for the transport of all these materials in the ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Real handy and easy to operate dynamic sounding rig with excellent terrain capabilities, suitable for dynamic penetration tests according to ISO 22476-2 (replaces DIN 4094-3). The unit is based on a crawler undercarriage with hydrostatic drive and passive brakes and a foldable mast for easy transport. The crawler is provided with a sturdy framework incorporating all technical components and 2 ...